The printer should be released the box set up using DHCP for addressing. I don't know if that has something to do with it. I don't have the USB cable to configure the machine and I was hoping to do it via the network (which tells me is an option). I have it plugged into the router and it says "cable disconnected" without an IP address. I just bought a mfp laserjet pro 400 m425dn printer/phtocopier and I can't seem to connect to our network. LaserJet pro 400 m425dn mfp: mfp laserjet pro 400 m425dn will not connect to the network Once it is fully operational, try again to connect to web services. Turn off the power, wait 30 seconds and then turn it back on. You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. You don't fill the part entitled WINS server, which can be left alone. Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. Then click on IPv4 in the left column who will bring to the top of the address configuration page. Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast. I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |